Large Caisson Removed Pneumatic Air Lifting Inflatable Rubber
Airbag
Advantages of Florescence inflatable rubber airbag
1. Big carrying capacity
2. High capacity against compression and twisting
5. Durable aging resistance and anti-wear characteristic
6. Higher flexibility and damping capacity
Standard specifications of Florescence inflatable rubber airbag
1> Diameter (D): From 0.3m to 2.2 m.
2> Effective Length (EL): From 6m to24m.
3> Total Length (TL): From 7m to28m.
4> Other specification of ship launching airbags also available
upon customer’s request
Working pressure of Florescence marine rubber airbag:
| Diameter | Layer | Work pressure | Diameter | Layer | Work pressure |
| D=0.8M | 3 | 0.13 Mpa | D=1.5M | 3 | 0.07 Mpa |
| 4 | 0.17 Mpa | 4 | 0.09 Mpa |
| 5 | 0.21 Mpa | 5 | 0.11 Mpa |
| 6 | 0.25 Mpa | 6 | 0.13 Mpa |
| 7 | 0.30 Mpa | 7 | 0.15 Mpa |
| 8 | 0.33 Mpa | 8 | 0.18 Mpa |
| D=1.0M | 3 | 0.10 Mpa | D=1.8M | 3 | 0.06 Mpa |
| 4 | 0.13 Mpa | 4 | 0.08 Mpa |
| 5 | 0.17 Mpa | 5 | 0.09 Mpa |
| 6 | 0.20 Mpa | 6 | 0.11 Mpa |
| 7 | 0.25 Mpa | 7 | 0.13 Mpa |
| 8 | 0.28 Mpa | 8 | 0.15 Mpa |
| D=1.2M | 3 | 0.09 Mpa | D=2.0M | 3 | 0.05 Mpa |
| 4 | 0.11 Mpa | 4 | 0.07 Mpa |
| 5 | 0.14 Mpa | 5 | 0.08 Mpa |
| 6 | 0.17 Mpa | 6 | 0.10 Mpa |
| 7 | 0.20 Mpa | 7 | 0.12 Mpa |
| 8 | 0.23 Mpa | 8 | 0.14 Mpa |
Storage of the air bag
* If the air bag will not used for quite a long time, it shall be
washed and dried, filled with French chalk inside and coated with
French chalk outside as well as put in dry, shady and ventilated
place in the room.
* Place storing the air bag shall be far away from the heat source.
* The air bag can’t contact with acid, alkali, grease and organic
solvents.
* The air bag should be stretched flat when not used. it’s not
allowed to pole up and stack heavy object on the air bag.
Special attentions during the use of the airbag
* Control the working pressure strictly and it’s not allowed to
exceed the working pressure.
* There shall be no sharp and protruding hard object on the contact
surface with the airbag in case it punctures the skin of the airbag
.
* Try to avoid distortion happened to the length direction of the
airbag
* Empty charge test shall be performed if the air bag is not used
for a long time or reused after repair. Charge pressure if the
airbag shall be the same as the test pressure valve when delivered.
Inspectors shall be at least 3 meters away from the air bag. For
air bag recovered from large damage, its working pressure shall be
reduced reasonably. Besides, annual check shall be conducted on air
bag which are used often.
* Do not drag the air bag on the ground.
Q1: How can I get samples from you?
A: We are honored to provide you samples for check
quality.Customers just confirm freight collect and then we could
send out the sample by FedEx,DHL,UPS,TNT and so on.
Q2: What’s certificates can your company provide?
A: We can provide CCS,ABS,DNV,LR,BV certificates.
Q3: What about your warranty time?
A: Our warranty period is 24 months.During this time,any problems
about products from our factory,we solemn promise to change and
repair them for free;if problems from customers’ improper
operating,we could provide free guidance and repair materials
